Alaska DMV CDL warm-up test

  • Questions50
  • Correct to pass40
  • Passing score80%
  • Minimum age18 years

10 questions. Pick an answer to see if it is right and why; you need 8 correct answers to pass.

  1. 1. When is tire pressure most accurately compared with the recommended figure?

    Show answer

    Answer B: When the tires are cold, before the vehicle has been driven

    Recommended pressures are cold pressures, so a reading taken before the tires have heated up is the only one that can be compared directly.

  2. 2. You are inspecting the vehicle alone and need to confirm that the stop lights work. Which method is correct?

    Show answer

    Answer A: Have a helper press the brake pedal, or apply the brake in a way that keeps it on while you check from outside

    Stop lights are checked from outside the vehicle while the brakes are applied, so a helper or a brake held on is needed.

  3. 3. In dense city traffic you cannot see 12 seconds ahead because other vehicles block the view. What is the best response?

    Show answer

    Answer A: Slow down and open up more space in front of you

    When you cannot see far enough ahead, extra following distance buys back the reaction time that the blocked view has taken away.

  4. 4. An unblocked crate 4 feet long and weighing 1,500 pounds needs at least how many tiedowns?

    Show answer

    Answer A: Two

    A short article that weighs more than 1,100 pounds requires at least two tiedowns even though it is under 5 feet long.

  5. 5. Which components on a typical engine are driven by belts that must be checked for wear and tension?

    Show answer

    Answer D: The alternator, the water pump and, on many vehicles, the air compressor

    Belts drive accessories such as the alternator, the water pump and the air compressor, so one failed belt can take out charging, cooling or air supply.

  6. 6. On a tractor with a sliding fifth wheel, what does moving the fifth wheel forward do?

    Show answer

    Answer A: Puts more of the trailer weight onto the steering axle

    Moving the coupling point forward transfers weight from the drive axles to the steering axle, which is how a driver corrects a drive axle that is over the limit.

  7. 7. What does it mean to overdrive your headlights at night?

    Show answer

    Answer D: Driving so fast that you cannot stop within the distance lit by your headlights

    You must be able to stop inside the distance you can see; at night that distance is limited by the headlights, so speed must be lowered to match.

  8. 8. What is the main purpose of a retarder fitted to a heavy vehicle?

    Show answer

    Answer B: To help slow the vehicle and reduce the need to use the service brakes

    Exhaust, engine, hydraulic and electric retarders all slow the vehicle so the brakes stay cool and wear less, especially on grades.

  9. 9. In very hot weather, how often should you check the tires during a trip?

    Show answer

    Answer D: About every two hours or every 100 miles

    Heat raises tire pressure and can lead to blowouts, so tires are checked about every two hours or 100 miles when it is very hot.

  10. 10. What does the suspension system weight rating tell the driver?

    Show answer

    Answer A: The maximum weight that the manufacturer says the suspension can carry

    Like tires and axles, suspensions have a manufacturer capacity, and loading beyond it can damage springs and air bags.